1965 Accelerator Pedal To Shaft Spring - (Up Until 4/24/68)
Accelerator Pedal To Shaft Spring - (Up Until 4/24/68). Accelerator Pedal to Shaft Spring for 1965 Through 4/24/1968 Mustang & 1967 Thru 4/24/1968 Cougar. This spring allows the accelerator pedal to return to an up-right position after being depressed. Attaches to the backside of the accelerator pedal.
Accelerator Bellcrank Hardware Kit - 170/200. Accelerator Bellcrank To Firewall Hardware Kit For 1965-1966 Mustang/Fairlane With 170/200 6 Cylinder Engines. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
Accelerator Bellcrank Hardware Kit - 260/289. Accelerator Bellcrank To Firewall Hardware Kit For 1965-1966 Mustang/Fairlane With 260/289 Engines. Complete your restoration with new original design and style hardware with the correct markings. 3 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
£5.20
1965-66 Accelerator Pedal Rod Grommet
Accelerator Pedal Rod Grommet. Accelerator Pedal Rod Rubber Grommet for 1965-1966 Mustang. Seal the area around your accelerator pedal rod with a new gromment. By forming a seal around the accelerator rod where it passes through the firewall, this rubber grommet keeps air out of the interior when driving.
Dimensions: 1-3/4" O.D. & 3/8" I.D.
£3.90
1965-67 Accelerator Return Spring Bracket - 289-4V
1965-1967 - Accelerator Return Spring Bracket - 289-4V. Accelerator Return Spring Bracket, Steel for & 1967 Cougar with 289 4-bbl. Factory style steel bracket mounts on the carburetor base and provides an attaching point for the accelerator return spring.
1965-1967 - Bushing/Clip Kit, Accelerator Linkage/Rod - V8. Accelerator Linkage to Accelerator Rod Bushing and Carburetor to Accelerator Rod Clip 5 piece Kit for 1965-& 1967 Cougar 260/289.
Correctly and safely connect your accelerator linkage to your accelerator rod, and your carburetor to your accelerator rod with this replacement clip and bushing kit.
£29.25
1965-68 Accelerator Linkage Clip
1965-1968 - Accelerator Linkage Clip. Accelerator Linkage Clip for & 1967-1968 Cougar. This clip connects the throttle rod to the carburetor linkage. Fits 3/16" diameter rod. Sold individually.
*This is also used to attach the kickdown cable to the accelerator bellcrank.
£1.95
1965-68 Accelerator Linkage To Rod Bushing
1965-1968 - Accelerator Linkage To Rod Bushing. Accelerator Linkage to Accelerator Rod Bushing for and 1967-1968 Cougar.
-This is the bushing on the accelerator linkage where it connects to the accelerator rod.
Dimensions:
-1/8" I.D.
-1/2" O.D.
-3/8" Height
£9.10
1965-68 Accelerator Pedal Hardware Kit
1965-1968 - Accelerator Pedal Hardware Kit. Accelerator Pedal Mounting Hardware Kit For & 1967-1968 Cougar. Complete your restoration with new original design and style hardware with the correct markings. 2 piece kit includes the special accelerator pedal screw and retainer needed to secure the accelerator pedal to the bellcrank with the correct style markings as original.
£7.15
1965-68 Accelerator Pedal Retaining Screw
1965-1968 - Accelerator Pedal Retaining Screw. Accelerator Pedal Retaining Screw for & 1967-1968 Cougar. This black phospate finish philips-head screw attaches to the accelerator pedal linkage. Sold individually, use 1 per car.
£7.15
1965-68 Accelerator Return Spring Bracket - 289-2V
1965-1968 - Accelerator Return Spring Bracket - 289-2V. Steel Accelerator Return Spring Bracket for 1965-68 Mustang and 1967-1968 Cougar with 289 2-bbl. This metal bracket mounts on the carburetor base to keep tension on that end of the accelerator return spring.
1965-1973 - Throttle Cable Mounting Bracket & Return Springs. Lokar Throttle Cable Mounting Bracket & Stainless Return Spring. The stainless steel bracket mounts to the rear of Holley, Edelbrock, AFB, Quadrajet, Demon & In-Line Dual Quads & provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable.
1967 - Accelerator Bellcrank Hardware Kit - 200 6 CYL. Accelerator Bellcrank To Firewall Hardware Kit For With 6 Cyl. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
1967 - Accelerator Bellcrank Hardware Kit - 289/390/427. Accelerator Bellcrank To Firewall Hardware Kit For 1967 Mustang/Fairlane/Comet With 289/390/427 Engines. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
£5.20
1967-68 Accelerator Pedal Rod Grommet
- Accelerator Pedal Rod Grommet. Accelerator Pedal Rod Grommet for 1967-1969 Mustang and Cougar. This simple rubber disc can save you a great deal of grief. By forming a seal around the accelerator rod where it passes through the firewall, it keeps out copious amounts of water and debris.
Dimensions: 2-1/4" O.D. & 1-3/4" I.D.
£3.90
1967-68 Accelerator Return Spring Bracket - 390/428
- Accelerator Return Spring Bracket - 390/428. Accelerator Return Spring Bracket for 1967-1968 Mustang & Cougar 390 & 428. This bracket mounts to the base of the carburetor & provides a place of attachment for the spring that on one end hooks to the bend in the accelerator rod. Will also fit 1967-1968 Fairlanes with 390 or 428.
£55.25
1967-68 Clip Set, Accelerator Rod End - 6 CYL
- Clip Set, Accelerator Rod End - 6 CYL. Accelerator Rod End Clips, Set of 4 for 1967-1968 6-Cylinder Fords.
These clips act as a clevice to join together two ends of accelerator rods. Sold as a set of 4, use one set per car.
1968 - Accelerator Bellcrank Hardware Kit - 200 6 CYL. Accelerator Bellcrank To Firewall Hardware Kit For 1968 Mustang With 6 Cyl. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
£5.20
1968 Accelerator Bellcrank Hardware Kit - 289/428
1968 - Accelerator Bellcrank Hardware Kit - 289/428. Accelerator Bellcrank To Firewall Hardware Kit For 1968 Mustang/Fairlane/Comet With 289/302/390/428 Engines. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
£5.20
1968 Throttle Return Spring - 289/302/390GT
1968 - Throttle Return Spring - 289/302/390GT. Throttle Return Spring for 1968 Mustang and Cougar 289 2-bbl, 302 2-bbl, and 390 GT. This is the green throttle return spring. Sold individually.
Length: 2-3/8"
£35.10
1968-70 Accelerator Pedal To Shaft Spring - (4/25/68 To 70)
1968-1970 - Accelerator Pedal To Shaft Spring - (4/25/68 To 70). Accelerator Pedal to Shaft Spring for Built From 4/25/68 thru 1970 & Cougars Built From 4/25/68 thru 1970. This spring allows the accelerator pedal to return to an up-right position after being depressed.
£14.95
1969 Accelerator Bellcrank Hardware Kit
1969 - Accelerator Bellcrank Hardware Kit. Accelerator Bellcrank To Firewall Hardware Kit For 1969 Mustang/Fairlane/Comet & Torino/Cyclone/Montego. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
£5.20
1969 Throttle Return Spring - (Up To 4/9/69) 302/351/390/428
1969 - Throttle Return Spring - (Up To 4/9/69) 302/351/390/428. Throttle Return Spring for 1969-4/9/69 Mustang & Cougar Boss 302, 351W, 390, 428 CJ, SCJ. Spring that on one end hooks to the bend in the accelerator rod & hooks the accelerator return spring bracket at the base of the carburetor on the other end. Also called accelerator return spring. Finished in the correct-style blue/gray color. Sold individually, use (1) per car. For cars built after 4/9/69 see Related Parts below.
£38.35
1969-70 Throttle Cable Bracket - BOSS 302
1969-1970 - Throttle Cable Bracket - BOSS 302. Throttle Cable Bracket for 1969-1970 Boss 302. This is the stamped steel bracket to which the throttle cable attaches. These brackets mount to the carburetor baseplate. A necessary part when converting from a 2v to a 4 v carburetor.
1969-1970 - Throttle Cable Bracket - V8(EXC B-302 & 70 428). Throttle Cable Bracket for 1969-1970 V8's (All Except Boss 302 & 1970 428). This is the stamped steel bracket to which the throttle cable attaches. These brackets mount to the carburetor baseplate. A necessary part when converting from a 2v to a 4 v carburetor.
£104.65
1970 Accelerator Bellcrank Hardware Kit
1970 - Accelerator Bellcrank Hardware Kit. Accelerator Bellcrank To Firewall Hardware Kit For 1970 Mustang & 1970-1971 Fairlane/Torino/Cyclone/Montego/Ranchero. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
1970 - Throttle Cable Bracket Bolt Kit - 428 Cobra Jet. Engine Throttle Cable Bracket Fastener Kit For 1970 428 Cobra Jet Engines. 2 piece kit includes the correct hex bolt/washer needed to secure the engine throttle cable bracket with correct markings for 1970 428 Cobra Jet Engines.
£7.15
1971-73 Accelerator Bellcrank Hardware Kit
- Accelerator Bellcrank Hardware Kit. Accelerator Bellcrank To Firewall Hardware Kit For 1971-1973 Mustang. Complete your restoration with new original design and style hardware with the correct markings. 4 Piece kit includes hex washer head screws needed to secure the accelerator bellcrank to the firewall.
£7.15
1971-73 Thrttle Cable Bracket Botls - Pair, V8
- Thrttle Cable Bracket Botls - Pair, V8. Engine Throttle Bracket Fastener Kit For 1971-1973 V8 FoMoCo Engines. 2 piece kit includes the correct hex bolt/washer needed to secure the engine throttle bracket with correct markings for 1971-1973 V8 FoMoCo engines.
- Bracket, Throttle Cable Billet (Holley) - Universal. Holley Billet Throttle Cable Bracket. If you're going the street rod route, go the whole way with something that looks good while providing a real measure of safety. This red anodized bracket is multi-adjustable to work on Holley models 4150 and 4160 carburetors. It includes a dual return spring combination that's perched on a uniquely effective mount. Hardware is all stainless steel to stand up to the rigors of time. The Holley name is boldly engraved and provides a very special touch to this outstanding product.
Essex Mustang Centre are one of the UK's largest Ford Mustang specialists, focusing on classic Mustangs from 1965-1973. Most of the popular parts (thousands) on this store are kept in stock for immediate shipping after your order has been placed. You'll find pretty much everything you need to fully restore a Mustang here. Prices are competitive and staff are knowledgeable and friendly.
We stock thousands of parts including panels, lights, body mouldings, electrical, interior and thousands more.
If you prefer to place your order over the phone, please call 01702 820 033 and one of our staff will take your order.
Points, Condenser and Spark Plug Kit for '65-'73