1964 Hood - Original Ford Tooling - With Correct Leading Edge Details
If you are lucky enough to have an early 1964 1/2 Mustang you'll no doubt want to retain the small details which make it unique from all other years.
This original Ford tooling hood is a great way to do that. The leading edge on the first production run of the Mustang hood was not folded under unlike the 65-66. It's these individual quirks that make your '64 1/2 worth so much!
Same gauge & weight as original
Easy to fit
Hood letters available separately
£1444.30
1964-65 Hood Latch Assembly
Hood Latch Assembly for a 1964-65.
Can't get your hood open quick enough for everyone to admire your gleaming engine? A rusty or worn hood latch could be your problem!
This replacement hood latch comes complete with top brace and grille support.
Painted black to prevent corrosion
Easy to fit
Quality part
£169.00
1965-66 Hood - Original Ford Tooling
If you crave authenticity for your then you'll need to add this Original Ford Tooling hood to your list when restoring her to her former glory.
Don't waste hours attempting to straighten ripples or dents in your old hood only to find it's still not quite right. Simply replace the whole thing for a beautiful front end, just as the factory intended.
Licensed Ford product
Easy to fit
Always trial fit before prepping or painting
£1261.00
1965-66 Reproduction Hood
Want the same great look at a fraction of the price? Then this reproduction 1965-66 Hood is definitely for you.
Slightly heavier than the original, making it a tad stronger and more durable, this quality reproduction part is perfect to complete your restoration.
Steel Panel
Finished in black primer
Easy to fit
£348.40
1967-68 "Eleanor Style\\\\\\\" Hood Scoop
Give you a touch of Eleanor class without undertaking the full conversion!
This fiberglass hood scoop is a stylish modification to your existing hood. Stand out from the crowd with the head turning, iconic, Eleanor style add on.
Bond-on
Grey gel coat finish
W 28" rear, 29" front x L 35" x H 2-1/4"
Additional Images
£266.50
1967-68 Hood - Original Ford Tooling - With Turn Signals
If only original parts will satisfy your appetite when restoring your then this Ford Tooling hood has your name on it.
After facing years against the elements head on your current hood may be warped, rusted & dented. No one wants a hood full of bondo, so simply replace the whole panel with this genuine Ford part.
Turn signals available separately.
Steel panel
Always trial fit before prepping or painting
Finished in black primer
Additional Images
£1261.00
1967-68 Hood - Original Ford Tooling - Without Turn Signals
This 1967-68 Original Ford hood is the missing piece to complete your authentic restoration. For the perfect fit and unbeatable quality use this Ford licensed part. As a major focal point of your Mustang, don't let an old rusty hood spoil the appearance of your classic vehicle. Simply bolt on this genuine panel when restoring your 1967-68.
Fits Coupe, Fastback & Convertible
No turn signal cut outs
Finished in black primer
Additional Images
£1261.00
1967-68 Hood Latch Support
This quality reproduction hood latch support will ensure that your hood catches and closes properly every time.
Consider replacing this part when installing a new hood for a perfect match.
Fits 1967-68 Mustang
Attaches to the upper and lower radiator support
Fits Coupe, Fastback & Convertible
£132.60
1967-68 Reproduction Hood - With Signal Cutouts
Don't be fooled by the price of this reproduction 1967-68 Hood. It may be a fraction of the price of the original but it's in no way lacking in quality. Use this quality steel panel when restoring your Mustang without having to break the bank!
Replicates the original in every way! It even features the optional turn signal cut outs.
Finished in black primer
Easy to fit
Fits all models - Coupe, Fastback & Convertible
Additional Images
£416.00
1967-68 Reproduction Hood - Without Signal Cutouts
Does your need a new hood? Do you want quality at an affordable price? Then this is the part for you!
No need to compromise with this reproduction hood. This steel panel is just like the original.
Finished in protective black primer
Fits all 1967-68
Quality part
Additional Images
£468.00
1969-70 Hood - Original Ford Tooling
If your 1969-70 Mustang has been unloved for several years, the hood will almost certainly need replacing.
This original Ford Tooling part fits like a glove and will give you restored Mustang the finishing touch it deserves.
Fits all 1969-70
Can be cut to accommodate shaker style hood scoop
Steel panel, finished in black primer
£1261.00
1969-70 Hood Latch Support
This stamped steel reproduction hood latch support is a great replacement for your damaged or missing original.
Mounts under the hood latch, and catches when the hood is shut.
Fits all 1969-70
Attaches to upper and lower radiator support
Quality part
£139.10
1969-70 Mach 1 Hood Scoop
This fiberglass hood scoop is for 1969-70 Mustang Mach 1.
As with all fiberglass products a trial fit and preparation are essential before fitting to your vehicle.
This scoop has 8 fixed mounting studs for ease of fitment.
*Does not have turn signal cut outs.
Can be fitted to other vehicles
Measures 27-1/2" x 15-1/2" x 2-1/4"
Grey gel coat finish
£377.00
1969-70 Reproduction Hood
When undertaking a full restoration on your 1969-70 the costs can soon mount up. Save yourself a few bucks using this quality reproduction hood.
This panel benefits from being slightly thicker than the original making it stronger and more rigid, without costing you the earth.
Trial fit recommended before fitting
Steel panel
Fits all models - Coupe, Fastback & Convertible
£770.90
1971-73 Reproduction Hood - "NASA" Style Hood
This hood is the correct style for Mach 1 or Boss 351, but fits to all other 1971-73. This unique design sets this year of Mustang apart from all others!
Why waste hours of workshop time and consumables mending dents and treating rust in your existing hood when this quality reproduction part is ready to be bolted on.
Essex Mustang Centre are one of the UK's largest Ford Mustang specialists, focusing on classic Mustangs from 1965-1973. Most of the popular parts (thousands) on this store are kept in stock for immediate shipping after your order has been placed. You'll find pretty much everything you need to fully restore a Mustang here. Prices are competitive and staff are knowledgeable and friendly.
We stock thousands of parts including panels, lights, body mouldings, electrical, interior and thousands more.
If you prefer to place your order over the phone, please call 01702 820 033 and one of our staff will take your order.