This bracket is spot welded to the trunk floor and supports the tail lamp panel.
The rear bumper bracket simply bolts to this piece when mounting the rear bumper (available separately).
Requires welding
Passenger side also available
Suitable for Coupe, Convertible & Fastback
£44.20
1964-66 Inner Trunk Bracket - RH
1964-1966 Inner Trunk Bracket - Passenger Side.
Whilst reinforcing the tail light panel this bracket also provides a mounting point for the rear bumper bracket.
Requires spot welding to the trunk floor.
Quality part
Easy to fit
Fits all models
£44.20
1965-66 Deck / Trunk Lid - Coupe/Convertible
Deck / Trunk Lid - Coupe/Convertible.
This quality reproduction, stamped steel replacement trunk lid features all of the factory mounting points so it fits like a glove. Years on the road may have left several of the panels on your 65-66 Mustang looking weathered or old. A new deck lid is a must when fully restoring your coupe or convertible.
Easy to fit
Hinges sold separately
Also known as luggage compartment door
Additional Images
£351.00
1965-66 Deck / Trunk Lid - Coupe/Convertible GT/CS Fiberglass Trunk Lid With Spoiler
Deck / Trunk Lid - Coupe/Convertible GT/CS Fiberglass Trunk Lid With Spoiler.
If your looking for something different and want your 65-66 Mustang to stand out from the crowd, this fiberglass trunk lid is a great place to start. The '68 Shelby & California Special both featured this 3 piece deck lid complete with spoiler and end caps. Give you vehicle this much sort after style using this replacement part.
Mounts using stock hinges and hardware
Fits Coupe & Convertible
As with all fiberglass, some prepping and fitting may be required
£1123.20
1965-66 Deck / Trunk Lid - Fastback
Deck / Trunk Lid - Fastback.
If the rear end of your Mustang looks like the back end of a bus it's time to replace your deck lid. Whether bent, buckled or rusted don't spoil the look of your valuable classic. Use this trunk lid to give her a desirable posterior!
Give your Mustang the WOW factor with this Shelby Style deck lid! Dress your 65-66 Fastback as Carrol Shelby intended by adding this lightweight trunk lid complete with matching end caps.
A common rust area on all because of the nature of its purpose. This stamped steel bracket replaces the corner of trunk rain gutter where the quarter panel and tail lamp panel meet.
Fits 1965-66 Coupe & Convertible
Passenger side also available
Requires welding
Additional Images
£55.90
1965-66 Rear Trunk Corner - LH - Fastback
Rear Trunk Corner - Drivers side.
A common rust area on all because of the nature of its purpose. This stamped steel bracket replaces the corner of trunk rain gutter where the quarter panel and tail lamp panel meet.
This area is prone to rust on all and is normally rotten beyond repair. This stamped steel bracket welds to the quarter panel and tail light panel. It forms part of the trunk gutter.
Fits 1965-66 Coupe & Convertible
Driver side also available
Requires welding
Additional Images
£55.90
1965-66 Rear Trunk Corner - RH - Fastback
Rear Trunk Corner - Passenger side.
This area is prone to rust on all and is normally rotten beyond repair. This stamped steel bracket welds to the quarter panel and tail light panel. It forms part of the trunk gutter.
Fits Fastback
Driver side also available
Requires welding
£110.50
1965-70 Complete Trunk Floor Convertible
Complete Trunk Floor.
If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor. Use this complete assembly when there are just too many rust holes to patch up.
This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.
Includes:
Trunk floor extensions
Trunk Inner Brackets
2 rubber body plugs
£793.00
1965-70 Complete Trunk Floor Convertible with Transition Pan
Complete Trunk Floor.
If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor. Use this complete assembly when there are just too many rust holes to patch up.
This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.
Includes:
Trunk floor extensions
Trunk Inner Brackets
2 rubber body plugs
£975.00
1965-70 Complete Trunk Floor Coupe/Fastback
Complete Trunk Floor.
If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor. Use this complete assembly when there are just too many rust holes to patch up.
This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.
Includes:
Trunk floor extensions
Trunk Inner Brackets
2 rubber body plugs
£793.00
1965-70 Complete Trunk Floor Coupe/Fastback with Transition Pan
Complete Trunk Floor.
If when you pop the trunk lid on your you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor. Use this complete assembly when there are just too many rust holes to patch up.
This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.
Includes:
Trunk floor extensions
Trunk Inner Brackets
2 rubber body plugs
£812.50
1965-70 Convertible Trunk Brace End Cap LH
pair of 1965-1970 Convertible Trunk Brace End Cap LH
These pieces need to be replaced when changing your trunk floor rear cross member.
These pieces fix at either end of the rear floor cross member reinforcement, located above the trunk floor cross member. These parts are available separately.
Driver Side
Fits 1965-70 Convertible
£104.00
1965-70 Convertible Trunk Brace End Cap RH
pair of 1965-1970 Convertible Trunk Brace End Cap RH
These pieces need to be replaced when changing your trunk floor rear cross member.
These pieces fix at either end of the rear floor cross member reinforcement, located above the trunk floor cross member. These parts are available separately.
Passenger Side
Fits 1965-70 Convertible
£104.00
1965-70 Trunk Floor Panel Drop Off - RH
Trunk Floor Panel Drop Off - Passenger side.
This is the part inside the trunk, next to the fuel tank, on top of the frame rail.
Whether completing a ground up restoration or simply making your Mustang road worthy the chances are that this panel will need replacing. In 95% of this drop off panel is full of rust holes.
Fits Coupe, Convertible & Fastback
Dimensions: 33-11/16" L x 8-5/16" W
1" trimming required for 1969-70 models.
Additional Images
£110.50
1965-70 Trunk Floor Panel Drop Off- LH
Trunk Floor Panel Drop Off - Drivers side.
Whatever the year or model of your Mustang, the chances are that these trunk floor drop offs will need replacing. This is one of the top 3 most common areas to find rust on your Coupe, Convertible or Fastback.
This is the part located to the side of the fuel tank above the frame rail.
Quality reproduction
Measures 33-11/16" L x 8-5/16" W
Requires approximately 1" trimming for 1969-70 models.
Additional Images
£110.50
1967-68 Inner Trunk Bracket LH
Inner Trunk Bracket.
This bracket reinforces the tail light panel where the rear bumper attaches. It spot welds to trunk floor and rear cross member.
Fits Coupe, Convertible & Fastback
Fits driver side
Welding required
£45.50
1967-68 Inner Trunk Bracket RH
Inner Trunk Bracket.
This bracket reinforces the tail light panel where the rear bumper attaches. It spot welds to trunk floor and rear cross member.
Fits Coupe, Convertible & Fastback
Fits passenger side
Welding required
£45.50
1967-68 Rear Trunk Corner - LH (Fastback)
Rear Trunk Corner - Driver side.
This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening. Most Fastbacks have suffered some corrosion in this area.
This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening. Most Coupe or Convertibles have suffered some corrosion in this area.
Stamped steel
Welding required
Driver side also available
£42.25
1967-68 Rear Trunk Corner - RH (Fastback)
Rear Trunk Corner - Passenger side.
This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening. Most Fastbacks have suffered some corrosion in this area.
Stamped steel
Welding required
Driver side also available
£52.00
1969-70 Inner Trunk Bracket
1969-1970 Inner Trunk Bracket.
This inner trunk bracket bolts to your tail lamp panel and welds the to trunk floor thus keeping your tail light panel fixed securely.
Requires welding
Fits all models
Steel
Fits either side
£52.00
1969-70 Rear Trunk Corner - LH (Fastback)
1969-1970 Rear Trunk Corner - Driver side.
This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening. Most Fastbacks have suffered some corrosion in this area.
Stamped steel
Welding required
Passenger side also available
£104.00
1969-70 Rear Trunk Corner - RH (Fastback)
1969-1970 Rear Trunk Corner - Passenger side.
This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening. Most Fastbacks have suffered some corrosion in this area.
Stamped steel
Welding required
Driver side also available
£104.00
1971-73 Complete Trunk Floor Fastback with Transition Pan
Complete Trunk Floor.
If when you pop the trunk lid on your 1971-73 Mustang you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor. Use this complete assembly when there are just too many rust holes to patch up.
This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.
Includes:
Trunk floor extensions
Trunk Inner Brackets
2 rubber body plugs
£1326.00
1971-73 Full Trunk Floor Pan
Full Trunk Floor Pan.
Just like the original this quality reproduction trunk floor has authentic ribbing and stamped impressions.
Covers trunk floor area of 54" x 38".
Fits all models
Requires use of trunk floor extension patches (available separately)
1 piece floor
£397.80
1971-73 Inner Trunk Bracket
Inner Trunk Bracket.
This inner trunk bracket bolts to your tail lamp panel and welds the to trunk floor thus keeping your tail light panel fixed securely.
commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.
Fits Coupe & Convertible
Welding required
Passenger side sold separately
£147.55
1971-73 Rear Trunk Corner - LH (Fastback)
Rear Trunk Corner - Drivers side.
commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.
commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.
Fits Coupe & Convertible
Welding required
Passenger side sold separately
£147.55
1971-73 Rear Trunk Corner - RH (Fastback)
Rear Trunk Corner - Passenger side.
commonly corroded area of 1971-73. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.
Essex Mustang Centre are one of the UK's largest Ford Mustang specialists, focusing on classic Mustangs from 1965-1973. Most of the popular parts (thousands) on this store are kept in stock for immediate shipping after your order has been placed. You'll find pretty much everything you need to fully restore a Mustang here. Prices are competitive and staff are knowledgeable and friendly.
We stock thousands of parts including panels, lights, body mouldings, electrical, interior and thousands more.
If you prefer to place your order over the phone, please call 01702 820 033 and one of our staff will take your order.
Points, Condenser and Spark Plug Kit for '65-'73