These are Replacement disc pads for our DBC conversion kits. Set of 4 (both wheels). Brake pads are sold in sets for either front or both rear wheels. The pads are new and will meet or exceed OEM specifications.
£44.20
Brake Light Switch Adapter
Brake Light Switch Adapter. Used on 1964 1/2 and 1960-64 Falcon/Comets with the external brake light switch mounted on the master cylinder.
£66.30
Brake Adjusting Hole Cover
Brake Adjusting Hole Cover for a Ford Mustang. 1965-73 Mustang; 1960-70 Falcon/Comet front or rear; 1964-79 F100-350.
£5.20
Adjustable Brake Proportioning Valve
This is an Adjustable Brake Proportioning Valve. This remote mounted valve can be used to adjust or maintain brake balance. 100-1000 PSI range. and Falcons.
£89.70
Emergency Brake Lever Boot For Part #7000F
This is an Emergency brake lever boot for use with custom floor mount hand brake part# 7000F.
1979-93 "Speed Bleeder" Brake Bleeder Screw - With Rear Disc
1979-1993 "Speed Bleeder" Brake Bleeder Screw - With Rear Disc. Now you can bleed your hydraulic braking system quickly and easily by yourself! The patented, spring-loaded check valve in each speed bleeder lets you open the bleeder once; and leave it open until you’ve finished bleeding that wheel. Sold in pairs. Four bleeder screws are required per car.
£24.05
1979-69 Font Standard Dis Brake Kit Power - Manuel Trans
Font Standard Dis Brake Kit Power - Manuel Trans for a 1979-69. 1967-1969 drum to disc conversion kit with 4 piston cast iron calipers; power. Bolt to 6 cylinder or V8 drum brake spindles. Includes dual bowl master cylinder. For manual transmissions only. Bolt pattern is 5x 4.5, with 11.25" rotors.
£3127.15
1979-69 Font Standard Dis Brake Kit Power - Automatic Trans
Font Standard Dis Brake Kit Power - Automatic Trans for a 1979-69. 1967-1969 drum to disc conversion kit with 4 piston cast iron calipers; power. Bolts to 6 cylinder or V8 drum brake spindles. For Automatic transmissions only. Bolt pattern is 5x 4.5, with 11.25" rotors.
1972-Brake Hardware Kit - Rear (w/1-3/4" Wide Brakes). Mustang & Falcon. Only for drums.
£29.25
1971-73 Russel Performance Braided Stainless Steel Brake Hoses - 2-Hose Set (two front hoses)
These are Russel Performance Braided Stainless Steel Brake Hoses - 2-Hose Set (two front hoses) for a 1971-73. Russell’s race quality braided stainless steel brake hoses are Teflon lined, D.O.T. approved and feature the proper fittings for a completely bolt-on installation. Tests show stopping distance improvements of up to 20% and a much firmer pedal feel. Available in 3 hose kits (two front and one rear hose) or 2 hose kits (front only). For origional Mustang disc brake set ups only (From Factory).
£258.70
1971-73 Rear Wheel Brake Hose
Rear Wheel Brake Hose for All 1971-1973 Ford.
£98.80
1971-73 Parking Brake Release Handles
These are Parking Brake Release Handles - Billet Aluminum. Top quality reproduction.
1970 Emergency Brake Handle Assembly. Complete emergency brake assembly with hand or foot operated arm and release mechanism. Authentic in every detail. Includes release handle (1965-70) and/or foot pedal pad (1969-70).
£128.70
1969-73 Parking Brake Pad Stainless Steel Trim
1969-Parking Brake Pad Stainless Steel Trim.
£18.20
1969-70 Parking Brake Release Handles
These are 1969-1970 Parking Brake Release Handles - Billet Aluminum. Top quality reproduction.
£93.60
1969-70 Parking Brake Front Cable & Conduit
1969-1970 Parking Brake Front Cable & Conduit.
£55.25
1969 Pre-Formed brake Booster Vacuum Lines - Boss 302 & 351 W
Pre-Formed brake Booster Vacuum Lines - Boss 302 & 351 W for a 1969. Pre-Formed brake Booster Vacuum Lines - Boss 302 & 351 W for a 1969. Replaces the pre-formed steel vacuum line between the intake manifold and the brake booster.
1969 Emergency Brake Handle Assembly. Complete emergency brake assembly with hand or foot operated arm and release mechanism. Authentic in every detail. Includes release handle (1965-70) and/or foot pedal pad (1969-70).
Stainless Steel Caliper Assembly - Mustang RH & 1968-70 Falcon RH for a 1968-1973. The caliper that eliminates piston sticking! Stainless steel pistons and new rubber in a black plated housing; all stainless steel transfer tube and boot retaining rings (where applicable) and bleeder valve. (Dust shield not incl.).
Stainless Steel Caliper Assembly - Mustang LH & 1968-70 Falcon RH for a 1968-1973. The caliper that eliminates piston sticking! Stainless steel pistons and new rubber in a black plated housing; all stainless steel transfer tube and boot retaining rings (where applicable) and bleeder valve. (Dust shield not incl.).
£143.00
1968-73 Brake Pedal Pad - & 1968 Falcon, Auto Trans, Brake Pedal Pad Trim
1968-Brake Pedal Pad - & 1968 Falcon, Auto Trans, Brake Pedal Pad Trim.
£20.15
1968-73 Brake Pads
These are Brake Pads for a 1968-1973. Brake pads are sold in sets for either front or both rear wheels. The pads are new and will meet or exceed OEM specifications.
£64.35
1968-73 Brake Hardware Kit - Front Disc
1968-Brake Hrdware Kit - Front Disc. Mustang & Falcon. Only for drums.
£109.85
1968-70 Russel Performance Braided Stainless Steel Brake Hoses - 2-Hose Set (two front hoses)
These are Russel Performance Braided Stainless Steel Brake Hoses - 2-Hose Set (two front hoses) for a 1968-1970. Russell’s race quality braided stainless steel brake hoses are Teflon lined, D.O.T. approved and feature the proper fittings for a completely bolt-on installation. Tests show stopping distance improvements of up to 20% and a much firmer pedal feel. Available in 3 hose kits (two front and one rear hose) or 2 hose kits (front only). For origional Mustang disc brake set ups only (From Factory).
£137.80
1968-70 Brake Pedal Assembly W/Manual Trans
1968-1970 Brake Pedal Assembly W/Manual Trans. This reconditioned brake pedal assembly is required when converting a non-power brake 1967-to power brakes.
£161.20
1968-69 Rear Wheel Brake Hose - Boss, Big Block
Rear Wheel Brake Hose - Boss, Big Block for a 1968-1969.
Pre-Formed brake Booster Vacuum Lines - 428 Shelby for a 1968-1969. Replaces the pre-formed steel vacuum line between the intake manifold and the brake booster.
Pre-Formed brake Booster Vacuum Lines - 428 (Exc Shelby) for a 1968-1969. Replaces the pre-formed steel vacuum line between the intake manifold and the brake booster.
1968-1969 Mustang Emergency Brake Cable - V8 RH. Cable fits from equalizer to rear brakes. Fits 1968-69 V8 Mustang, right hand side.
£56.55
1968-69 Emergency Brake Cable - V8 LH
1968-1969 Mustang Emergency Brake Cable - V8 LH. Cable fits from equalizer to rear brakes. Fits 1968-69 V8 Mustang, left hand side.
£75.40
1968-69 Brake Pedal Assembly W/Auto Trans
1968-1969 Brake Pedal Assembly W/Auto Trans. This reconditioned brake pedal assembly is required when converting a non-power brake 1967-to power brakes.
Pre-Formed brake Booster Vacuum Lines - 8 Cyl 302 for a 1968. Replaces the pre-formed steel vacuum line between the intake manifold and the brake booster.
Replacement Brake Booster for a 1967-1970. This American made power brake booster is designed to replace original equipment units on 1967-70 with drum or disc brakes. All parts are newly manufactured, not rebuilt! Overall dimensions are slightly smaller than original for more working room under the hood. Sold outright, no exchange or core required.
£425.10
1967-70 Manual Transmission Disc/Drum or Drum/Drum - 1" Bore Kit
For with manual transmission. 1" bore master cylinder for disc/drum or drum/drum applications. Includes pedal. Includes 9" single diaphragm booster.
KIT INCLUDES:
CORRECT PEDAL ASSEMBLY
POWER BOOSTER
1' BORE 3/8' STROKE REAL FOUR WHEEL DISC MASTER CYLINDER
HOSE KIT
£843.05
1967-70 Manual Trans Disc/Drum Or Disc/Drum Power Booster Kit
For with Manual transmission. 1-1/8" bore 7/16" stroke master cylinder combination valve is used to provide the correct front to rear pressure balance and to help eliminate rear wheel lockup and nose dive.
1967-70 Auto Trans. Disc/Disc or Disc/Drum 1 1/8" Bore Kit
For with automatic transmission. 1-1/8" bore master cylinder for disc/drum applications. Includes pedal. 9" Single Diaphragm Booster. Combination valve is used to provide the correct front to rear pressure balance and to help eliminate rear wheel lockup and nose dive.
KIT INCLUDES:
CORRECT PEDAL ASSEMBLY
POWER BOOSTER
1 1\8'' BORE 7/16'' STROKE REAL FOUR WHEEL DISC MASTER CYLINDER
VACUUM HOSE,INTAKE MANIFOLD FITTING
COMBINATION VALVE, BRACKET, FITTINGS, HARDWARE, LINES
£1024.40
1967-69 Rear Wheel Brake Hose
Rear Wheel Brake Hose for a 1967-1969.
£89.70
1967-68 Parking Brake Release Handles
These are 1967-1968 Parking Brake Release Handles. Top quality reproduction.
£18.20
1967-68 Parking Brake Lever
Parking Brake Lever. Connects parking brake release cable to equalizer rod.
Emergency Brake Handle Assembly. Complete emergency brake assembly with hand or foot operated arm and release mechanism. Authentic in every detail. Includes release handle (1965-70) and/or foot pedal pad (1969-70).
£128.70
1967-68 Brake Light Switch (from 11/18/68)
Brake Light Switch with power disc brakes. 1969-1970 Falcon with power brakes (from 11/18/68). 1965 Falcon with power brakes. Stoplight switch.
£29.25
1967-68 Brake Light Switch
Brake Light Switch with power drum brakes, 1969-70 Mustang with power brakes. Stoplight switch.
£29.25
1967-68 Brake & Clutch Pedal Support - Without Power Brakes
1967-1968 Mustang Brake & Clutch Pedal Support - Without Power Brakes.
£117.00
1967 Stainless Steel Caliper Assembly - RH
Stainless Steel Caliper Assembly - RH for a 1967. The caliper that eliminates piston sticking! Stainless steel pistons and new rubber in a black plated housing; all stainless steel transfer tube and boot retaining rings (where applicable) and bleeder valve. (Dust shield not incl.).
£399.75
1967 Stainless Steel Caliper Assembly - LH
Stainless Steel Caliper Assembly - LH for a 1967. The caliper that eliminates piston sticking! Stainless steel pistons and new rubber in a black plated housing; all stainless steel transfer tube and boot retaining rings (where applicable) and bleeder valve. (Dust shield not incl.).
£399.75
1967 Parking Brake Rear Cable & Conduit
Parking Brake Rear Cable & Conduit - sold individually.
1965-73 Brake Pedal Pad - Manual Trans, Brake Pedal Pad Trim
Brake Pedal Pad - Manual Trans, Brake Pedal Pad Trim.
£16.25
1965-73 "Speed Bleeder" Brake Bleeder Screw - With Front Disc
1965-1973 "Speed Bleeder" Brake Bleeder Screw - With Front Disc. Now you can bleed your hydraulic braking system quickly and easily by yourself! The patented, spring-loaded check valve in each speed bleeder lets you open the bleeder once; and leave it open until you’ve finished bleeding that wheel. Sold in pairs. Four bleeder screws are required per car.
£24.05
1965-73 "Speed Bleeder" Brake Bleeder Screw - Front or Rear Drum
1965-1973 "Speed Bleeder" Brake Bleeder Screw - Front or Rear Drum. Now you can bleed your hydraulic braking system quickly and easily by yourself! The patented, spring-loaded check valve in each speed bleeder lets you open the bleeder once; and leave it open until you’ve finished bleeding that wheel. Sold in pairs. Four bleeder screws are required per car.
£24.05
1965-72 Brake Shoes V8 Rear Brake Shoes
These are Rear Break Shoes for 1965-73 10" x 1/3"
260
289
302
390
£95.55
1965-71 Brake Hardware Kit
Brake Hardware Kit - 1965-1971 Mustang 8 cyl. & 1971 Mustang 6 cyl front or rear drum. 1964-70 Falcon V8, front or rear. Kit fits 10" drum brakes.. Mustang & Falcon. Only for drums.
£29.25
1965-70 Brake Shoes V8 Front Brake Shoes
These are 10" x 2 1/4" front brake shoes for 1965-71 V8:
260
289
302
Will also fit 1969-71 250
£106.60
1965-70 Brake Shoes 6 Cyl Rear Brake Shoes
These are Break Shoes for - 6 cyl 170/200-Rear - 9" x 1 1/2". Brake shoes are sold in sets for either front or both rear wheels. The shoes are relined and will meet or exceed OEM specifications.
£94.90
1965-70 Brake Shoes 6 Cyl Front Brake Shoes
These are Break Shoes for - 6 cyl 170/200-front - 9" x 2 1/4". Brake shoes are sold in sets for either front or both rear wheels. The shoes are relined and will meet or exceed OEM specifications.
£135.20
1965-70 Brake Hardware Kit
Brake Hardware Kit - 1965-1970 Mustang 6 cyl rear. 1964-70 Falcon 6 cyl with 9" rear. Mustang & Falcon. Only for drums.
£35.10
1965-68 Parking Brake Lever Return Spring
Parking Brake Lever Return Spring for a 1965-1968.
£14.95
1965-68 Brake Line Rubber Grommets
Brake Line Rubber Grommets for a 1965-1968. Sold in pairs.
£3.90
1965-68 Air Cleaner & Accelerator Fasteners - Gas Pedal To Screw Rod
This is an Air Cleaner & Accelerator Fasteners - Gas Pedal To Screw Rod 1965-1968. Screw for the pedal.
£5.85
1965-67 Russel Performance Braided Stainless Steel Brake Hoses - 3-Hose Set (two front hoses and one rear center hose)
These are Russel Performance Braided Stainless Steel Brake Hoses - 3-Hose Set (two front hoses and one rear center hose) for a 1965-1967. Russell’s race quality braided stainless steel brake hoses are Teflon lined, D.O.T. approved and feature the proper fittings for a completely bolt-on installation. Tests show stopping distance improvements of up to 20% and a much firmer pedal feel. Available in 3 hose kits (two front and one rear hose) or 2 hose kits (front only). For origional Mustang disc brake set ups only (From Factory).
£223.60
1965-67 Brake Pedal Pad - Auto Trans, Brake Pedal Pad Trim
1965-Brake Pedal Pad - Auto Trans, Brake Pedal Pad Trim.
£14.95
1965-67 Brake Pads
These are Brake Pads for a 1965-1967. Brake pads are sold in sets for either front or both rear wheels. The pads are new and will meet or exceed OEM specifications.
Stainless Steel Caliper Assembly - RH. The caliper that eliminates piston sticking! Stainless steel pistons and new rubber in a black plated housing; all stainless steel transfer tube and boot retaining rings (where applicable) and bleeder valve. (Dust shield not incl.).
£399.75
1965-66 Stainless Steel Caliper Assembly - LH
Stainless Steel Caliper Assembly - LH. The caliper that eliminates piston sticking! Stainless steel pistons and new rubber in a black plated housing; all stainless steel transfer tube and boot retaining rings (where applicable) and bleeder valve. (Dust shield not incl.).
These are 1965-1966 Parking Brake Release Handles. 1960-65 Falcon/Comet. Top quality reproduction.
£18.20
1965-66 Parking Brake Lever
Parking Brake Lever. Connects parking brake release cable to equalizer rod.
£31.20
1965-66 Front Disc Brake Calpier Shield
Stainless steel with attaching bolts. Fits factory 1965-66 disc calipers.
£44.20
1965-66 Emergency Brake Handle Assembly
Emergency Brake Handle Assembly. Complete emergency brake assembly with hand or foot operated arm and release mechanism. Authentic in every detail. Includes release handle (1965-70) and/or foot pedal pad (1969-70).
£144.95
1965-66 Dual Reservoir Booster Conversion - AT Master/Booster Assembly, All
Dual Reservoir Booster Conversion - AT Master/Booster Assembly, All. Add the safety and convenience of POWER to your 1965-66 Mustang’s braking system. This bolt-on conversion fits all 1965-66 with factory front discs and four wheel disc brakes (factory front/aftermarket rear). Includes dual reservoir master cylinder, power booster, firewall bracket and pushrod.
£843.05
1965-66 Brake Light Switch
Brake Light Switch with alternator, 1967-1970 Mustang except power brakes. 1965 Falcon without power brakes. Stoplight switch.
£29.25
1965-66 Brake Booster Bracket
Brake Booster Bracket. Mounts brake booster to firewall and provides necessary linkage to operate power booster. (shown on 2005A2 Replacement Power Brake Booster)
Pre-Formed brake Booster Vacuum Lines - 8 Cyl, 260 & 289 for a 1964-1965. Replaces the pre-formed steel vacuum line between the intake manifold and the brake booster.
Essex Mustang Centre are one of the UK's largest Ford Mustang specialists, focusing on classic Mustangs from 1965-1973. Most of the popular parts (thousands) on this store are kept in stock for immediate shipping after your order has been placed. You'll find pretty much everything you need to fully restore a Mustang here. Prices are competitive and staff are knowledgeable and friendly.
We stock thousands of parts including panels, lights, body mouldings, electrical, interior and thousands more.
If you prefer to place your order over the phone, please call 01702 820 033 and one of our staff will take your order.
Points, Condenser and Spark Plug Kit for '65-'73