1967 Coupe To Fastback Conversion Kit (Structural)
1967 Coupe To Fastback Conversion Kit.
The 1967 Fastback is now iconic but along with this comes the price.
We have seen bare shells with titles for $10,000 plus! These then require a further $10,000 to restore the shell.
So why not convert your Coupe into the iconic Fastback for a fraction of the price.
Our fully comprehensive kit comes with all parts required to convert your 1967 Coupe to Fastback (structurally).
Our kit includes all parts below:
Front roof brace
Rear roof brace
Fastback roof panel
Trunk panel brace
Deck Lid Hinges-Pair
Rear filler panel
Door & quarter frame assembly - LH & RH
Quarter vent door assembly - LH & RH
Rear quarter panel - LH & RH
Additional Images
£11765.00
1968 Coupe to Fastback Structural Conversion Kit
1968 Coupe To Fastback Conversion Kit.
Many re-builders and restoration shops have been doing this conversion for years and now with the price of fastbacks rocketing it has become a popular conversion.
Unlike in the old days when you had to find out exactly what parts you needed (or ask someone who had done it before) and buy the parts only to find at the critical point that you are missing that $5 part that stops the build .
Now it is so much easier with our all in one kit!
All the parts you need to turn your Coupe into a Fastback are here (structural metal work only).
The kit includes:
Front roof brace
Rear roof brace
Fastback roof panel
Trunk panel brace
Deck Lid Hinges-Pair
Rear filler panel
Door & quarter frame assembly - LH & RH
Quarter vent door assembly - LH & RH
Rear quarter panel - LH & RH
£11765.00
1969 Coupe To Fastback Conversion Kit (Structural)
1969 Coupe To Fastback Conversion Kit.
Many re-builders and restoration shops have been doing this conversion for years and now with the price of fastbacks rocketing it has become a popular conversion.
Unlike in the old days when you had to find out exactly what parts you needed (or ask someone who had done it before) and buy the parts only to find at the critical point that you are missing that $5 part that stops the build .
Now it is so much easier with our all in one kit!
All the parts you need to turn your Coupe into a Fastback are here (structural metal work only).
Rusted A-post, rocker panels and wheel house? Why not replace the whole lot in one go.
This part consists of:
A-Post
Roof line cant rail
B-Post door jamb
Inner & outer wheelhouse
Surrounding reinforcement
£2860.00
1965 GT & 1966 Dash Panel Assembly
1965 GT & 1966 Full Dash Panel Assembly.
Many early have had their dashes cut and modified over the last 45 years to fit radios, after market clocks, dials and switches leaving the dash looking like swiss cheese and full of holes.
Save time welding and filling all of the non factory holes and simply replace with this new dash.
1 piece metal structure
Dash pad available separately
£965.90
1970 Fender Extension - LH
1970 Fender Extension - LH.
£910.00
1970 Fender Extension - RH
1970 Fender Extension - RH.
£910.00
1965 Dash Panel Assembly
1965 Full Dash Panel Assembly.
Many early have had their dashes cut and modified over the last 45 years to fit radios, after market clocks, dials and switches leaving the dash looking like swiss cheese and full of holes.
Save time welding and filling all of the non factory holes and simply replace with this new dash.
1 piece metal structure
Dash pad available separately
£816.40
1967-68 Steel Dash Panel with knee holes
steel dash panel with knee holes.
£815.10
1965-66 Convertible Rear Seat Divider and Frame
Convertible Rear Seat Divider and Frame.
This part sits behind the rear seat.
Forms the soft top well
Power top pump mounts to this piece
£812.50
1965-68 Rear Frame Rail - LH Coupe/Fastback
Driver Side Rear Frame Rail for a 1965-1970 Coupe/Fastback.
It's possible that over time your beloved frame rails have been attacked by rust. Help is at hand with this complete rear frame rail assembly which includes the rear torque box and leaf spring shackle mounting points.
67-1/2" Long
Fits Coupe & Fastback
Passenger side also available
£741.00
1965-68 Rear Frame Rail - RH Coupe/Fastback
Rear Frame Rail Passenger Side for a 1965-1968.
The rear frame rail forms part of what is known as the chassis, the under body of your vintage Mustang. This complete rear frame rail features the rear torque box which is a strengthening feature used to stop the chassis from twisting.
67-1/2" Long
Fits Coupe & Fastback
Driver side also available
£741.00
1967-68 Steel Dash Panel without knee holes
steel dash panel without knee holes.
£741.00
1968 California Special Function Side Scoops
Pair of California Special Function Side Scoops for a 1968. All Fiberglass Parts require special preparation and fitting. In some cases modification to car and or part may be required. All Fiberglass Parts are sold as is with no guarantees against cracking, warping, or poor fit. Fiberglass Parts are after market replacement parts. Purchaser assumes all responsibility for correct installation. Sold in pairs.
£643.50
1967-68 Fastback - Rear Upper Panel Brace
Fastback - Rear Upper Panel Brace. This item is a steel replacement trunk divider upper brace for 1967-68 Fastbacks.
The Shelby mustang must be one of the worlds great cars. If you are creating a 1965 Shelby clone and are looking to be correct in all details then this Shelby style rear seat replacement panel is a must. Saves about 80lbs over factory rear seat. Originally used on the 1965-66 Shelby. Note: Fiberglass parts require special preparation and fitting. In some cases modification to fiberglass parts may be required. Fiberglass parts are sold “AS IS” with no guarantees against cracking, warping or poor fit. Purchaser assumes all responsibilities for correct installation. No returns are accepted on special order fiberglass parts.
Shelby style
Fiberglass
original looking
£608.40
1968 California Special Tail Lamp Panel
1968 California Special Tail Lamp Panel. steel replacement tail lamp panel for 1968. The part was originally made out of fiberglass and now is available in steel. Won't scratch & crack like fiberglass.
1966 "Shelby Style" Rear Seat Replacement Panel - Reproduction. Saves approximately 80lbs. Shelby style, fiberglass rear seat replacement panel originally used on the 1965-66 Shelby. Note: All fiberglass parts require special preparation and fitting. In some cases modification to fiberglass parts may be required. Fiberglass parts are sold “AS IS” with no guarantees against cracking, warping or poor fit. Purchaser assumes all responsibilities for correct installation. No returns are accepted on special order fiberglass parts.
£502.45
1967-68 A Pillar / Post Kit
A-pillar Panel Kit.
Lots of 67-68 mustang are now suffering from rust in the lower A-posts.
So we now have available this full replacement kit.
The kit includes:
Both drivers & passengers side A-posts
Both drivers & passengers side upper and lower door hinge mounting plate
£487.50
1967-68 Fastback Rear Seat Trap Door
rear seat trap door for a 1967-68 Fastback.
£474.50
1969-70 Fastback Rear Seat Trap Door - Steel
1969-1970 Fastback Rear Seat Trap Door - Steel.
£456.30
1967-68 Upper Cowl Cover Panel
Upper Cowl Cover Panel. Fits between your hood and windshield.
£435.50
1967 Cast Aluminium Tail Lamp Panel - 2+2
Cast Aluminium Tail Lamp Panel - 2+2. Sold in pairs. Attaching hardware included. #40584A pictured above.
Cast Aluminium Tail Lamp Panel - Coupe/Convertible. Sold in pairs. Attaching hardware included. #40584A pictured above.
£419.90
1965-70 Over Axle / Transition Panel with Shock Mounts
Over Axle / Transition Panel with Shock Mounts.
The transition panel fits between the rear seat and trunk. It is what the top of the rear shocks bolt through.
£416.00
1967-68 Lower Cowl Panel
lower cowl panel.
£416.00
1965-66 A Pillar / Post Kit
A-pillar Panel Kit.
Lots of 65-66 mustang are now suffering from rust in the lower A-posts.
So we now have available this full replacement kit.
The kit includes:
Both drivers & passengers side A-posts
Both drivers & passengers side upper and lower door hinge mounting plates
£412.10
1965-66 Fastback Rear Seat Trap Door - Steel
Fastback Rear Seat Trap Door - Steel.
Metal Trap Door 1965-66
For everyone with a 1965-66 Fastback Mustang who needs that little bit of extra room in there trunk this part is for you!
Going for a weekend away or a day out or just looking to increase the room this metal trap door will do the trick for you!
Easily attached
Increase space
Additional Images
£408.20
1967-68 Luggage Compartment Door - 2+2
Luggage Compartment Door - 2+2. Reproduction. NOTE: Requires Truck freight.
Front Bumper Stone Guard - E-Coated Black. Reproduction. Same gauge & weight as OEM, E-coated Black
£355.55
1967-68 B Pillar / Post Kit
B-pillar Panel Kit.
Lots of 67-68 mustang are now suffering from rust in the lower B-posts.
So we now have available this full replacement kit.
The kit includes:
Both drivers & passengers side B-posts
£338.00
1969 Tail Lamp Panel
1969 Tail Lamp Panel. Reproduction. (Exc Shelby).
£314.60
1965-66 Radiator Support with Crossmember
Radiator Support with Crossmember.
An important structural part of your Mustang, this radiator support is located at the very front of the engine bay between the left and right inner fenders. As its name suggest it also supports the radiator. Common replacement in vehicles that have suffered front end damage.
Fits all models
Stamped steel
Comes in black primer for corrosion protection
£312.00
1969 Radiator Support with crossmember
1969 Radiator Support. Reproduction.
£305.50
1969-70 Rear Spoiler
1969-1970 Rear Spoiler. Available for 1969-70. Comes with all attaching hardware.
£289.90
1971-73 Rear Spoiler
Rear spoiler for a 1971-1973.
£289.90
1969-70 \"OE\" Style Fiberglass Rear Spoiler
1969-1970 "OE" Style Fiberglass Rear Spoiler. Available for 1969-70 and 1971-73. Comes with all attaching hardware. Unpainted. Guaranteed no sagging.
£286.00
1970 Radiator Support with Crossmember
1970 Radiator Support. Reproduction.
£273.00
1970 Tail Lamp Panel
1970 Tail Lamp Panel. Reproduction. (Exc Shelby).
£266.50
1971-73 Tail Lamp Panel
Tail Lamp Panel. Reproduction.
£266.50
1969 Radiator Support
1969 Radiator Support. Reproduction.
£260.00
1970 Radiator Support
1970 Radiator Support. Reproduction.
£260.00
1964-70 Seat Platform - Single Piece (Convertible)
Lots of 1964-70 Ford now have rusted out seat platforms! Whether restoring or not, safe seat bases are a must. So if yours are starting to rot replace them now before its to late.
Available for 65-68 coupe or 64-70 convertible
please state when ordering
One piece replaces both sides at once
Fit over trans tunnel
Easy to fit
£234.00
1965-66 Front Bumper Stone Guard - Original Ford Tooling
This stone guard for your 1965-66 is from Fords original tooling. So if originality is required then this stone guard will fit your requirements.
Original tooling
Perfect fit
Period correct
£225.55
1971-73 Seat Base / Platform - LH (Coupe/2+2)
1971-73 seat platform LH. Will fit 1971-73 Coupe and Fast Back.
The seat platform is the box section that the seat fixes to, and is welled to the floor pan.
Easy fitment
Finished in plain metal
Additional Images
£205.40
1971-73 Seat Base / Platform - RH (Coupe/2+2)
1971-73 seat platform RH. Will fit 1971-73 Coupe and Fast Back.
The seat platform is the box section that the seat fixes to, and is welled to the floor pan.
Easy fitment
Finished in plain metal
Additional Images
£205.40
1965-66 Rear Cowl / Window Panel - Fastback
Rear Cowl / Window Panel - Fastback.
The sweeping roof line of the much sought after Fastback Mustang extends to this rear cowl panel before meeting with the deck lid. An area often plagued by rust on these early classics it is easily replaced with this new panel and a welder.
Fits Fastback only
Connects to the quarter panels
Panel behind the rear winow
Additional Images
£201.50
1969-70 Frame Support Pair
1969-1970 Frame Support Pair. 1969-70 firewall to floor frame support. After years of road wear strengthen your frame with these supports. Sold in pairs.
£201.50
1969-70 Inner Upper Door Trim - Textured Steel - LH
1969-1970 Inner Upper Door Trim - Textured Steel - LH.
£195.00
1969-70 Inner Upper Door Trim - Textured Steel - RH
1969-1970 Inner Upper Door Trim - Textured Steel - RH.
£195.00
1965-66 Radiator Support
Radiator Support.
An important structural part of your Mustang, this radiator support is located at the very front of the engine bay between the left and right inner fenders. As its name suggest it also supports the radiator. Common replacement in vehicles that have suffered front end damage.
Fits all models
Stamped steel
Comes in black primer for corrosion protection
£174.20
1965-68 Inner Cowl Patch Panel - Left Side
1965-1968 Inner Cowl Patch Panel - Driver Side.
A leaky cowl is often the product of trapped water which rots the metal surrounding the cowl air vent. Removing the top section of the cowl and welding in these patch panels will ensure your feet stay dry inside Mustang.
This patch panel replaces the section of the lower cowl ofter rusted away by a build up of leaves and water over the years. Don't let a leaky cowl dampen your enthusiasm for your Mustang. Repair it today with this 19 gauge steel inner cowl piece.
15-1/2" x 18"
Requires welding
Removal of the upper cowl is necessary for installation
The convertible Mustang certainly isn't lacking in style! It is however lacking a little in structural integrity due to having no roof. Add the rigidity it needs with these reinforcement panels located on the underside of the floor pan directly below the seats.
The convertible Mustang body does not offer the same rigidity as the other models due to its desirable fold away roof. Fear not, these reinforcement panels are designed to add the structural integrity you crave. Panel measures 22-1/2" x 16-3/4".
Die stamped sheet metal
Located below the seats on the underneath of the floor pan
Driver side also available
Additional Images
£169.00
1965-66 Tail Lamp / Rear Light / Back Panel
Tail Lamp/ Rear Light/Back Panel.
Whether your Pony has been the victim of a rear end shunt or you're simply restoring her to her former glory this tail lamp panel will help you along the way. This is the rear panel of your Mustang, located between the quarter panels, to which the tail lights mount.
Steel panel
Fits all models
Has hole for fuel filler
£162.50
1969-70 Seat Base / Platform - LH (Coupe/2+2)
1969-70 Seat Platform LH. Will fit 1969-70 Coupe and Fastback.
The seat platform is the box section that the seat fixes to, and is welled to the floor pan.
Easy fitment
Finished in plain metal
£162.50
1969-70 Seat Base / Platform - RH (Coupe/2+2)
1969-70 Seat Platform RH. Will fit 1969-70 Coupe and Fastback.
The seat platform is the box section that the seat fixes to, and is welled to the floor pan.
Easy fitment
Finished in plain metal
£162.50
1971-73 Lower Rear Quarter - LH
Lower Rear Quarter - LH. Has original contour on back, bottom & wheel opening. More than 12” high.
£162.50
1971-73 Lower Rear Quarter - RH
Lower Rear Quarter - RH. Has original contour on back, bottom & wheel opening. More than 12” high.
£162.50
1965-66 Rear Cowl / Window Panel - Convertible
Rear Cowl / Window Panel - Convertible.
Yet another common area of rust on early mustangs, the panel between the rear window and the trunk lid may have rust spreading across it like an infectious rash. Cut out that rot and replace with this quality weld in part.
Fits convertible only
Often referred to as a "Deck lid filler panel"
Connects the quarter panels
Additional Images
£156.00
1969-70 Rear Cowl Panel - Fastback
1969-1970 Rear Cowl Panel - Fastback. Between rear window and trunk lid.
£152.10
1967-70 Front Crossmember
Front Crossmember. Mounts under radiator core support.
£149.50
1967-68 Rear Cowl Panel - Coupe
Rear Cowl Panel - Coupe. Between rear window and trunk lid.
£139.10
1967-68 Rear Cowl Panel - Fastback
Rear Cowl Panel - Fastback. Between rear window and trunk lid.
£139.10
1965-66 Lower Door Skin - LH
Lots of 1965-66 doors have rotted out bottoms however the rest of the door is fine therefore a new door skin is not required. If this is the case with yours then this lower repair panel is ideal.
Made from 20 gauge steel
Step flange on top edge
8" high
Additional Images
£136.50
1965-66 Lower Door Skin - RH
Lots of 1965-66 doors have rotted out bottoms however the rest of the door is fine therefore a new door skin is not required. If this is the case with yours then this lower repair panel is ideal.
Made from 20 gauge steel
Step flange on top edge
8" high
Additional Images
£136.50
1965-68 Seat Base / Platform - LH (Coupe/2+2)
1965-1968 Seat Platform - LH (Coupe/2+2). Available for 1965-68 coupes/2+2 and 1964-70 convertibles. This is the base that the front seats attach to.
£136.50
1965-68 Seat Base / Platform - RH (Coupe/2+2)
1965-1968 Seat Platform - RH (Coupe/2+2). Available for 1965-68 coupes/2+2 and 1964-70 convertibles. This is the base that the front seats attach to.
£136.50
1969-70 Lower Rear Quarter - Coupe/Convertible LH
1969-1970 Lower Rear Quarter - Coupe/Convertible LH. Has original contour on back, bottom & wheel opening. More than 12” high.
£136.50
1969-70 Lower Rear Quarter - Coupe/Convertible RH
1969-1970 Lower Rear Quarter - Coupe/Convertible RH. Has original contour on back, bottom & wheel opening. More than 12” high.
£136.50
1969-70 Lower Rear Quarter - Fastback LH
1969-1970 Lower Rear Quarter - Fastback LH. Has original contour on back, bottom & wheel opening. More than 12” high.
£136.50
1969-70 Lower Rear Quarter - Fastback RH
1969-1970 Lower Rear Quarter - Fastback RH. Has original contour on back, bottom & wheel opening. More than 12” high.
£136.50
1964-70 Rear Crossmember
Replacing your rear light panel on your 1964-70? Then complete the job and fit a new cross member at the same time
complete cross member
fits all years 64-70
easy to fit
£130.00
1965-66 Rear Cowl / Window Panel - Coupe
Rear Cowl / Window Panel - Coupe.
Located between the trunk lid, the rear window and the quarter panels this piece of sheet metal is the missing piece of the puzzle when putting your Mustang back together. Don't compromise your restoration using old sheet metal, simply weld in this deck lid filler panel for an outstanding finish.
Fits 1965-66 Coupe
Welding required
Quality part
Additional Images
£130.00
1965-70 Rear Frame Rail Rear Section - LH
Rear Frame Rail Rear Section - LH.
This stamped steel frame rail section replaces the rear part of the rear frame rail. It is not a patch or repair piece it replaces the last 29" of the rear chassis rail.
Includes reinforcement for leaf spring shackle mounting
Fits all models
Common area of corrosion on 65-70
£127.40
1965-70 Rear Frame Rail Rear Section - RH
Rear Frame Rail Rear Section - RH.
This is the 29" section of the rear frame rail at the very back of the vehicle. The chassis is the very base of your classic vehicle so when restoring her you need to start with this part to give you a solid frame with which to build on.
Stamped steel
Provides reinforcement for leaf spring shackle mounting
Fits Coupe, Convertible & Fastback
£127.40
1965-66 Front Bumper Stone Guard
Ford Mustang stone guards stop stones and in the process get damaged. so if yours is worse for wear replace it with a new one.
One piece
Easy fit
Finished in satin black
£126.10
1967-70 Radiator Support / Strut Rod Bracket (LH)
Radiator Support Bracket (LH) for a 1967-1970. This piece is welded to the frame at the radiator support. The strut rod attaches to the bottom of the brace.
£118.95
1967-70 Radiator Support / Strut Rod Bracket (RH)
Radiator Support Bracket (RH) for a 1967-1970. This piece is welded to the frame at the radiator support. The strut rod aatches to the bottom of the brace.
£118.95
1965-66 Lower Grille Support
Lower Grille Support.
This lower grille support does exactly what it says on the tin, it supports the grille when mounted between the headlight assemblies.
Located behind the front bumper
Stamped steel
Black coated to protect against corrosion
£114.40
1964-70 Inner Frame Patch
If your is not from a dry state then by now it will be suffering from some form of rot in the inner frame rails. These patch panels help put back the strength back and get you mobile again.
Made from heavy gauge steel
Fit both sides (trimming required)
Fit all models
Fits 1964-70
£109.20
1965-66 Radiator Support to Frame Bracket / Strut Rod Brace - LH
1965-1966 Radiator Support to Frame Bracket / Strut Rod Brace - Drivers Side.
This LH strut rod brace will reinforce your body. It welds to both the front cross member and frame to add strength and integrity. It also provides a mounting point for the strut rod.
16-1/2" x 4-1/4"
Passenger side also available
Requires welding
£109.20
1965-66 Radiator Support to Frame Bracket / Strut Rod Brace - RH
Radiator Support to Frame Bracket / Strut Rod Brace - Passenger Side.
Located between the radiator support cross member and the frame this bracket is used for mounting your strut rod as well as adding rigidity to your body.
Welding required
Fits all models
Retains body strength
£109.20
1965-66 Front Crossmember
Front cross members on the 1965-66 take a lot of abuse from road salt, rain, and of course leaky radiators and in most cases by now are showing signs of rust and rot they should therefore be replaced.
filler panels (pair). This part is located at the bottom of your windshield. Paint to match your interior.
£95.55
1971-73 Reproduction Rear Wing Pedestal Kit
Reproduction Rear Wing Pedestal Kit. Die-cast aluminum. Includes pedestals, pads and hardware.
£92.30
1967-68 Lower Rear Quarter - LH
Lower Rear Quarter - LH. Has original contour on back, bottom & wheel opening. More than 12” high.296.0000
£91.00
1967-68 Lower Rear Quarter - RH
Lower Rear Quarter - RH. Has original contour on back, bottom & wheel opening. More than 12” high.
£91.00
1964-68 Cowl Side Panel - LH
Some early Ford now have rust in the cowl panels behind the fire well. If this is the case with yours then this panel with get you back on course with your restoration. fits left hand side
perfect fit
made to factory dimensions
finished in black satin
Additional Images
£89.70
1964-68 Cowl Side Panel - RH
Some early Ford now have rust in the cowl panels behind the fire well. If this is the case with yours then this panel with get you back on course with your restoration. fits right hand side
perfect fit
made to factory dimensions
finished in black satin
Additional Images
£89.70
1971-73 Lower Rear Quarter Inner Panel - LH
Lower Rear Quarter Inner Panel - LH. This repair panel for the trunk area overlaps the trunk floor by 1" and drops off the meet the bottom of the quarter panel. H-9 1/2" x L-20 1/4".
£87.10
1971-73 Lower Rear Quarter Inner Panel - RH
Lower Rear Quarter Inner Panel - RH. This repair panel for the trunk area overlaps the trunk floor by 1" and drops off the meet the bottom of the quarter panel. H-9 1/2" x L-20 1/4".
£87.10
1965-70 Cowl Vent Repair Kit
Cowl Vent Repair Kit.
A quick fix to that all too common problem of a leaky cowl panel.
Kit includes:
2 plastic "hats"
Sealant
Instructions
£84.50
1970 Front Bumper Stone Guard
1970 Front Bumper Stone Guard. Reproduction.
£79.95
1969-70 Rear Spoiler Lower Support Brackets
These are a set of Rear Spoiler Lower support brackets for a 1969-1970.
£75.40
1967-68 Tail Lamp Panel Brace
Tail Lamp Panel Brace. Sold individually.
£74.75
1967-68 Stone Deflector Bracket - 3 Piece
Stone Deflector Bracket - 3 Piece.
£74.10
1969 Front Bumper Stone Guard
1969 Front Bumper Stone Guard. Reproduction.
£72.80
1965-66 Tail Lamp Panel Brace - Coupe/Fastback
Tail Lamp Panel Brace - Coupe/Fastback.
This stamped steel brace has a multitude of functions! Not only does it support your tail light panel from behind, it also provides a mounting place for the trunk latch striker plate.
Visible from inside the trunk
Fuel filler neck passes through it
12" L x 5-13/16" W
£61.10
1967-68 Front Bumper Stone Guard
Front Bumper Stone Guard. Reproduction.
£61.10
1965-66 Tail Lamp Panel Brace - Convertible
Tail Lamp Panel Brace - Convertible.
This stamped steel brace fits right behind your tail lamp panel supporting it from behind. The brace allows the fuel filler neck to pass through it.
Stamped steel
Fits convertible only
Strengthening part
£52.00
1967-68 Door Striker Kit With Date Code 8/66
Door Striker Kit With Date Code 8/66. These door striker plates are made of Silver cadmium, and have an original type date stamp on the head.
£35.75
1968-70 Door Striker Kit With Date Code 11/67
1968-1970 Door Striker Kit With Date Code 11/67. These door striker plates are made of Silver cadmium, and have an original type date stamp on the head.
£31.20
1965-66 Hood Latch Brace
1965-66 latch brace adds strength to the hood latch mechanism.
Black finish
£27.30
1965-73 Drain Hole Coverlet
Drain Hole Coverlet.
These oval drain hole covers can be removed if for some unfortunate reason your acquires excess water inside. These are sold individually and there are 4 required. They are located at the front and rear of the driver and passenger side floors.
Essex Mustang Centre are one of the UK's largest Ford Mustang specialists, focusing on classic Mustangs from 1965-1973. Most of the popular parts (thousands) on this store are kept in stock for immediate shipping after your order has been placed. You'll find pretty much everything you need to fully restore a Mustang here. Prices are competitive and staff are knowledgeable and friendly.
We stock thousands of parts including panels, lights, body mouldings, electrical, interior and thousands more.
If you prefer to place your order over the phone, please call 01702 820 033 and one of our staff will take your order.
Points, Condenser and Spark Plug Kit for '65-'73