Floor Pans & Related Items

Rear Half Floor Section - RH.  Located behind front seat. Original contour extends under lip of rear seat belt mounting on tunnel.

£126.10

Inner Floor Support Frame RH.

£62.40

Full Floor Pan - RH.  Correct floor pan. Picture above is for reference only and is not a picture of the actual product listed. Note: Truck freight is required for these items.

£221.00

Front Half Floor Section - RH.  Located under and forward of front seat, extending approx. 5” up toward firewall. This panel is correct for 1965-68 models. It will also fit 1969-70 models, but ribbing may be slightly different and can be modified to fit 1971-73 models.

£124.80

Complete 1 piece Floor Assembly for 1969-70 Mustang Coupes & Fastback.  This is the ultimate one piece floor assembly made from heavy gauge stamped steel.
Includes: Full Floor, Transition Pan, Trunk Pan, Rockers & Rear Frame Rails.

£5330.00

1966-1970 Rear Floor Extension - Passenger Side. 

There are a lot of minor difference on the early '65 Mustang, this panel being one of them.  On early models this panel features the brake cable channel.  Luckily we have it available for early models and later models, just remember to tell us what year you have when ordering.

• Quality part
• Ribbing is correct for 1965-68 but will also fit 69-70
• Panel measures 25" W x 17" L

£156.00

Trunk Floor Extension Patch Panel - Passenger Side.

Good things come in small packages. This compact repair piece attaches to the lower rear section of the quarter panel where the trunk floor drops off.

• Fits all models
• 21" x 9"
• Black coated for corrosion protection

£39.00

Rear Half Floor Section - Passenger Side.

This 19 gauge stamped steel panel replaces the area between the rear of the front seat and the front of the rear seat.  The floor is a common area of rust on early. 

• Features drain hole
• Suitable for all models
• Requires welding

£119.60

Complete Floor Section - Passenger Side (Coupe/Fastback). 

You may have your work cut out when restoring your 1965-70 Mustang.  Make things a little quicker and easier by replacing the front and rear section of the floor in one go. 

• Fits Coupe & Fastback models
• 19 gauge steel, black coated for corrosion protection
• Driver side also available

£240.50

Complete Floor Section - Driver Side (Coupe/Fastback). 

This panel replaces both the front and rear sections of the drivers side in one easy installation. Don't leave your floor looking like a patch work quilt, weld in this full length floor for a professional finish to your restoration.

• 19 gauge steel
• Fits Coupe & Fastback
• Suitable for 1965-70

£240.50

pair of 1965-1970 Full Length Floor Pans - Driver & Passenger Side (Coupe/Fastback). 

Shave £'s off of your restoration cost with this pair of full length floor pans.  It's highly likely that both sides of your floor will need replacing so cut costs and buy them together.

• Floors measure 60" x 24"
• Welding required
• 19 gauge steel panels

£451.10

Front Half Floor Section - Driver Side.

It's not unusual to find that some of your Mustang floor needs replacing.  If you are one of the lucky ones and only the front section is in need of repair then this section will aid your restoration while saving you money.

This 19 gauge steel panel measures 22-1/2" from the seat base forward. It includes 8" of the floor to firewall section.

• 24" W
• Ribbing may be slightly different of 69-70 models.
• Passenger side sold separately

£104.00

Front Half Floor Section - Driver Side.

It's not unusual to find that some of your Mustang floor needs replacing.  If you are one of the lucky ones and only the front section is in need of repair then this section will aid your restoration while saving you money.

This 19 gauge steel panel measures 38- 3/4". It includes 8" of the floor to firewall section.

• 24" W
• Ribbing may be slightly different of 69-70 models.
• Passenger side sold separately

£120.90

Frame/Floor Support - Convertible.

Commonly referred to as the front floor frame rail this piece extends from the seat pan to the torque box.  Due to its location it is subject to the elements and is therefore usually in need of replacement.

• 29" L x 2-3/4" W
• Fits driver and passenger side
• Sold individually

£169.00

Front Floor Support.
A critical torsional stress member, it runs across under the floor and over the transmission where the floor pan meets the firewall.
This crossbar support connects the two inner floor frame rails the run front to rear under the left and right sides of the floor.

• Adds strenght
• Black finish
• Easy fit

£139.75

A complete floor pan for your convertible is a must if you intend to carry out a serious restoration. This panel fits from the floor to fire wall panel and finishes at the back of the the rear seats, giving a perfect floor without any rust or rot.

• One piece
• Includes transmission tunnel
• Made to fit convertible
• Ready to prime and paint
• Fits all 64-70 convertibles

£786.50

Many early Ford are now suffering from rusted out floors, trunk floors, seat bases, rockers and transmission tunnels.

If yours is in this condition why waste time in buying all the individual parts and welding for hours; simply buy the complete one piece floor and save time and money.

Includes

• full floor
• transition pan
• trunk pan
• inner rockers and rear frame rails

Features

• made from heavy gauge steel
• comes in black stain finish
• saves time
• saves money

£5200.00

1964-1965 Rear Floor Extension - Driver Side.

This panel replace the part of the floor underneath the rear seat.  The panel can be provided with the channel for the brake cable (1965 models) or without (1966-70 models).  Please specify when ordering.

• 25" W x 17" L
• Stamped steel panel
• Fits Coupe, Convertible & Fastback

£111.80